10年品牌值得信賴
精誠團結、奮起拼搏、開拓進取

濟南彩鋼板

13969159292

0531-88686388

新聞中心

首頁>>新聞中心>>濟南C型鋼切割效果及其應力問題的解決方法!
新聞中心
聯系我們
濟南堅固彩鋼工程公司

聯系人:

電話:13969159292

地址:濟南市工業北路81號北鄰

濟南C型鋼切割效果及其應力問題的解決方法!

來源:http://www.ebassfish.com/ 日期:2021-03-18 發布人:jiangucaigang
濟南C型鋼的應用可以說是相當的廣泛,不僅可以作為鋼結構建筑中的檁條、墻梁;也可以自行組合成輕量型屋架、托架等建筑構件。不管是哪種用途,都會涉及到C型鋼的切割。由于不同的切割方法有著不同的切割效果,因此需要按照客戶的要求進行適當的選用。
Jinan C-beam is widely used, not only as purlin and wall beam in steel structure building, but also as lightweight roof truss, bracket and other building components. No matter what kind of use, it will involve the cutting of C-beam. As different cutting methods have different cutting effects, it is necessary to make appropriate selection according to the requirements of customers.
一般情況下,濟南C型鋼在鋼結構中應用的話,它的切割盡可能選擇在剪切機上或鋸床上進行,尤其是對于薄壁型鋼屋架。
In general, if Jinan C-beam is used in steel structure, its cutting should be carried out on shearing machine or sawing machine as far as possible, especially for thin-walled steel roof truss.
之所以這么建議,是因為這里要去下料要準確,易電動鋸割法做為適合,不僅工效高,而且斷面光滑平整、質量好,切割誤差非常的小。
The reason for this suggestion is that the blanking should be accurate, and the easy electric sawing method is suitable. It not only has high work efficiency, but also has smooth section, good quality, and very small cutting error.
濟南C型鋼廠
C型鋼也可以采用氣割的方式,但為了提高氣割質量,盡量采用小口徑噴嘴,并在切割后用錘子輕輕敲打,使切口平整,滿足各種用途的要求。跟其他冷彎型鋼一樣,C型鋼生產過程中面臨的問題是內應力的問題,由于材料存在較大的內應力,一旦投入使用的話有可能會發生變形,從而影響其使用效果。
Gas cutting can also be used for C-section steel, but in order to improve the quality of gas cutting, small diameter nozzle should be used as far as possible, and after cutting, hammer should be used to gently tap to make the incision smooth, so as to meet the requirements of various uses. Like other cold-formed steel, the problem in the production process of C-beam is the problem of internal stress. Due to the large internal stress of the material, once it is put into use, deformation may occur, which affects its use effect.
C型鋼的應力沒有辦法避免,在冷彎C型鋼的開卷、滾剪、閉卷等工藝過程中,都會增加一定的內應力,主要的是通過機械強制變形導致冷彎C型鋼具有一定的應力。除此之外,冷彎C型鋼如果沒有噴涂底漆,那么除銹和鈍化工藝也將會使得它的內應力釋放出來,造成彎曲和扭變。
There is no way to avoid the stress of C-beam. In the process of uncoiling, rolling shear and closing of cold-formed C-beam, certain internal stress will be increased. The main reason is that the cold-formed C-beam has certain stress through mechanical forced deformation. In addition, if the cold-formed C-beam is not sprayed with primer, the rust removal and passivation process will release its internal stress, resulting in bending and torsion.
在沒有辦法避免的情況下,只能通過合理的操作來減少應力的產生,作為生產廠家和用戶而言,也要關注這方面的問題,確保冷彎C型鋼能被廣泛的運用。
In the case of no way to avoid, we can only reduce the stress through reasonable operation. As manufacturers and users, we should also pay attention to this problem to ensure that the cold-formed C-beam can be widely used.
以上就是今天為大家分享的關于濟南C型鋼切割效果及其應力問題的解決的全部內容,希望對大家能有所幫助,想要了解更多內容可以電話聯系我們或者關注我們的網站,我們的工作人員會及時與大家取得聯系,期待您的來電。
The above is today for you to share about Jinan C-beam cutting effect and stress problem solving all content, hope to help you, want to know more content can call us or pay attention to our website, our staff will get in touch with you in time, looking forward to your call.
此文關鍵詞: 濟南C型鋼廠  

推薦閱讀/ Recommended reading

相信大家對彩鋼復合板都不會陌生,畢竟在生活中是比較常見的。雖然濟南彩鋼復合板引進不到20年時間,但由于其具有承力、保溫隔熱、裝飾、防

防火彩鋼板表面為什么出現壓斑? 2022-02-26
有哪些原因會導致C型鋼出現變形的現象? 2022-02-22
彩鋼瓦具有哪些優勢? 2022-02-17
復合板質量控制的措施及建議 2022-02-14
欧美激情视频-人妻av综合天堂一区-色天使色妺妺网站-无码a片