10年品牌值得信賴
精誠團結、奮起拼搏、開拓進取

濟南彩鋼板

13969159292

0531-88686388

新聞中心

首頁>>新聞中心>>濟南C型鋼講解鋼結構加工日常維護技巧
新聞中心
聯系我們
濟南堅固彩鋼工程公司

聯系人:

電話:13969159292

地址:濟南市工業北路81號北鄰

濟南C型鋼講解鋼結構加工日常維護技巧

來源:http://www.ebassfish.com/ 日期:2021-03-12 發布人:jiangucaigang
濟南C型鋼防銹方法,根據鋼材的銹蝕機理,鋼材的防銹方法分為4種。一是改變鋼材的組成結構。即在鋼材的冶煉過程中計入銅、鉻等合金元素以提高鋼材的抗銹能力,此即不銹鋼,由于造價太高,難在工程中大量應用。
According to the corrosion mechanism of steel, there are four kinds of antirust methods for Jinan C-beam. One is to change the composition and structure of steel. That is to say, copper, chromium and other alloy elements are included in the smelting process of steel to improve the rust resistance of steel. Stainless steel is difficult to be widely used in engineering due to its high cost.
Anti rust method, according to the corrosion mechanism of steel, steel rust method is divided into 4 kinds. One is to change the composition of steel. That is, in the process of steel smelting process, such as copper, chromium and other alloy elements to improve the ability to resist rust, this is stainless steel, because the cost is too high, it is difficult to apply in a large number of projects.
Anti rust method, according to the corrosion mechanism of steel, steel rust method is divided into 4 kinds. One is to change the composition of steel. That is, in the process of steel smelting process, such as copper, chromium and other alloy elements to improve the ability to resist rust, this is stainless steel, because the cost is too high, it  is difficult to apply in a large number of projects.
濟南C型鋼廠
目前僅用于小型裝飾性的工程。二是陰極保護法,即將構件與電源陰極相連,使構件失去的電子得到補充,鋼材內部始終維持電位平衡而不生銹。
At present, it is only used for small decorative projects. The second is the cathodic protection method, that is, the component is connected with the cathode of the power supply, so that the lost electrons of the component can be supplemented, and the internal potential of the steel is always balanced without rust.
Currently only used for small decorative works. Two is the cathodic protection method, the component and the power cathode is connected, so that the electronic components of the lost, the internal steel has always maintained the potential balance without rust.
Currently only used for small decorative works. Two is the cathodic protection method, the component and the power cathode is connected, so that the electronic components of the lost, the internal steel has always maintained the potential balance without rust.
此方法目前僅用于對水下或水下結構的保護。三是在構件表面用金屬覆蓋層保護,如電鍍或熱侵鍍鋅等方法,一般用于薄板材或小直徑裝飾性管材,如網架用鋼管。
At present, this method is only used for the protection of underwater or underwater structures. The third is to protect the surface of components with metal coating, such as electroplating or hot dip galvanizing, which is generally used for thin plate or small diameter decorative pipe, such as steel pipe for grid structure.
This method is currently only used for the protection of water or underwater structures. Three is in the component surface with metal coating protection, such as electroplating or hot dip galvanized, etc., generally used for thin plate or small diameter decorative pipe, such as steel pipe.
This method is currently only used for the protection of water or underwater structures. Three is in the component surface with metal coating protection, such as electroplating or hot dip galvanized, etc., generally used for thin plate or small diameter decorative pipe, such as steel pipe.
四是在鋼材表面噴涂以非金屬保護層,隔斷鋼材于空氣的接觸而達到防銹的目的,此方法施工方便,造價比較低,所以在工程中廣告應用,單耐久性差,一般幾年后須要再次噴涂。
The fourth is to spray a non-metallic protective layer on the surface of the steel to cut off the contact between the steel and the air, so as to achieve the purpose of rust prevention. This method is convenient for construction and low cost. Therefore, it has poor durability in the application of advertising in engineering, and generally needs to be sprayed again after a few years.
Four is in the steel surface coating to non-metallic protective layer, cut off the steel in air contact and achieve the purpose of anti rust, this method is convenient, cost is relatively low, so in the engineering application of advertising, single durability is poor, in general a few years later need to re spray.
Four is in the steel surface coating to non-metallic protective layer, cut off the steel in air contact and achieve the purpose of anti rust, this method is convenient, cost is relatively low, so in the engineering application of advertising, single durability is poor, in general a few years later need to re spray.
此文關鍵詞: 濟南C型鋼廠  

推薦閱讀/ Recommended reading

相信大家對彩鋼復合板都不會陌生,畢竟在生活中是比較常見的。雖然濟南彩鋼復合板引進不到20年時間,但由于其具有承力、保溫隔熱、裝飾、防

防火彩鋼板表面為什么出現壓斑? 2022-02-26
有哪些原因會導致C型鋼出現變形的現象? 2022-02-22
彩鋼瓦具有哪些優勢? 2022-02-17
復合板質量控制的措施及建議 2022-02-14
欧美激情视频-人妻av综合天堂一区-色天使色妺妺网站-无码a片