熱門關鍵詞：濟南彩鋼板 | 濟南復合板 | 濟南彩鋼瓦 | 濟南c型鋼 | 濟南鋼結構 |
Jinan rock wool composite board factory takes rock wool board as the foundation and adds cement surface, which shortens the construction period of rock wool board in installation and use by 70%, and effectively improves the project progress. The main material of rock wool composite board is basalt cotton board, basalt, iron ore, bauxite and so on as the main raw materials. After high temperature melting processing, the artificial inorganic fiber with appropriate amount of adhesive has the characteristics of light weight, small thermal conductivity, heat absorption and discontinuity.
Jinan composite board factory
Jinan composite board factory reminds everyone that construction is not allowed in strong wind climate and rain and snow climate above grade 5. During and after the construction, effective methods should be used to prevent the erosion of rain and sunlight, and the protective layer should be established in time. If it rains suddenly in the project, it is necessary to prevent the rain from washing the wall. Winter construction should be in accordance with the relevant specifications of antifreeze methods. The bonding method of rock wool composite board should keep the bonding area above 50%. After the composite rock wool board is finished with adhesive, the root bottom layer should be pasted on the bottom of the insulation board, and then the composite rock wool board should be placed horizontally from top to bottom from the horizontal direction.
In addition, it should be fixed by laying side by side. The joint itself should be compact. The gap between boards shall not exceed 2 mm. When the joint width is 2mm, insulating material shall be filled. The construction of external thermal insulation system of composite rock panel in energy saving and thermal insulation engineering should be carried out according to the approval. Drawings, planning documents and approved projects can save energy according to special insulation construction scheme. The manufacturer of the external insulation system of composite rock wool board should provide on-site training in the construction process, and cooperate with the construction unit and site supervision to do a good job in the operation of construction quality.
Jinan rock wool composite board factory
The composite rock wool board has the characteristics of light weight, small thermal conductivity and non combustion after high temperature melting and artificial inorganic fiber processing. This type of development is a typical application type for architecture and is mainly used for industrial building purposes according to the type of operation and basic requirements. The manufacturer of the external insulation system of composite rock wool board should provide on-site training in the construction process, and cooperate with the construction unit and site supervision to do a good job in the operation of construction quality. In the exterior wall thermal insulation project of composite rock panel, the construction can not be carried out when the temperature of low layer and construction environment is below 5 ℃.
Rock wool board with basalt and other natural ores as the main raw materials, after high temperature melting into fiber, adding an appropriate amount of binder, solidified. The products of Jinan rock wool composite board factory are suitable for industrial equipment, building, ship heat insulation, sound insulation, etc.